Truma Trumatic S 5002
The Trumatic S 5002 is a high-performance liquefied gas heater designed for caravans, motorhomes, and mobile homes, featuring automatic ignition and a built-in thermostat. It provides efficient convective heating with optional warm air distribution systems.
View official manual on manufacturer's site ↗Technical Specifications
Gas Pressure Mbar30 or 50 mbar
Power Consumption 12v66.7 mA / 0.01 mA (3V for ignition)
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Possible Cause | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|---|
Burner does not ignite / Pilot light fails | Gas supply interrupted, air in the gas line, or ignition battery drained. | — | Check gas cylinder and valves. Ensure battery is fresh and correctly oriented. Wait 2 minutes before attempting re-ignition. | DIY Safe |
Indicator lamp flashes continuously or rapidly | Igniter battery is low or depleted. | — | Replace batteries in the automatic igniter. | DIY Safe |
Frequently Asked Questions
Q: How do I start the Trumatic S 5002 heater?
Open the gas cylinder and stop valve in the supply line. Turn the control knob to setting 1-10, press down fully, and hold while pressing the ignition button until the flame lights and the control lamp stops flashing. Keep depressed for another 10 seconds.
Q: Can the heater be operated while driving?
Yes, if equipped with a cowl top TR 3 (or art.-no. 30700-03) and authorized according to national regulations.