Truma iNet X Connect
The Truma iNet X Connect enables remote control and monitoring of the compatible Truma panel and connected appliances via the Internet. It establishes mobile network connections between the panel, mobile devices running the Truma iNet X App, and the Truma iNet X Cloud.
View official manual on manufacturer's site ↗Technical Specifications
Power Consumption 12v70 mA (average), 0.9 W power consumption
Weight Kgca. 260 g
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Possible Cause | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|---|
LED button lights red | An error is showing - on the control panel as well as in the app. | — | Follow whatever solution the panel display or app suggests, then clear the error through the panel or app. | DIY Safe |
The LED button flashes or won't light up | Loss of power supply or connection issue. | — | Check the 12V DC supply and inspect the vehicle's fuses for it, replacing any that are faulty. | DIY Safe |
Connect does not respond | The unit may have frozen or experienced a temporary fault. | — | To restart it, keep the LED button pressed for 5 seconds, or unplug the Connect's cable, wait a few seconds, and plug it back in. | DIY Safe |
Frequently Asked Questions
Q: How do I restart the Truma iNet X Connect?
To restart it, keep the LED button pressed for 5 seconds, or unplug the Connect's cable and plug it back in a few seconds later.
Q: What should I do if a software update fails?
If a software update gets interrupted by a lost connection or power cut, it automatically drops back to the previous version - it'll usually try again on its own the next day.
Q: Can the Connect be installed on boats?
No - fitting it on boats or other watercraft is strictly against the rules.