Lunar Chassis & Running Gear
(Venus, 2019 Model Year)
Frequently Asked Questions
Q: How do I check the left and right friction pads on the AKS 3004 stabiliser?
1. Confirm the stabiliser's properly coupled: the coupling handle fully lowered and the red indicator button raised. 2. Press down on the stabiliser handle until resistance builds (meaning the friction pads have reached the ball, but aren't yet under load). 3. Look at the arrowhead on the stabiliser's arm: lined up with the two green marks means the pads are still like new. 4.
Lined up with the two red marks means the pads are worn and need replacing straight away. Note: with the handle correctly applied, the arrowhead should sit against the black line marked 2. The pads need no lubrication at all - just wipe them over with fine emery paper before every trip. There's no adjustment needed for the friction pads themselves.
Q: How do I fit the Al-Ko Secure Wheel Lock?
On a tandem-axle caravan, we'd recommend using a side-lift jack (the Al-Ko Jack Set, order number 1389235) to make fitting easier. Position the wheel so the receiver sits visible in the middle of the rim opening (don't use the opening that has the tyre valve in it). Unscrew the receiver's plastic cap and put it away in the tool kit.
Fit the locking bolt into its specific rim insert, then fit the socket key for the locking bolt. Line the locking bolts and assembly up with the receiver, and tighten the socket - using the supplied wheel spanner or a torque wrench - to the correct wheel torque. Take the socket key back out, fit the barrel lock, then hold it in place and lock it.