Elddis • Autoquest • Smoke & CO Alarms
Autoquest models: CV20, CV40

Elddis Smoke & CO Alarms

(Autoquest Campervan, 2019 Model Year)

Master Troubleshooting & Diagnostics Matrix

Error Code / IndicatorSymptom / MeaningPossible CauseStep-by-Step DIY FixSuggested Actions
N/A
Erratic or low sound from the smoke alarm
A defective alarm
Return the alarm for service.
Professional Intervention Required
N/A
Smoke alarm chirps every 30-40 seconds for at least seven days
The battery is running low
Replace the 9V battery with one of the specified types - using a different type can affect the alarm's operation.
DIY Safe
Recommended partAffiliate linksView partHide

This handbook specifies a 9V battery for the smoke alarm.

9V batteryDuracell Plus 9V Alkaline Batteries (2 Pack) 6LR61~£6.50 for 24.7★ (15,000+ ratings), dispatched/sold by Amazon
View on Amazon →
N/A
Smoke alarm still won't return to normal operation after cleaning
The unit itself has failed
Replace the smoke alarm.
DIY Safe
N/A
CO alarm chirps every 60 seconds with the red LED flashing
Low batteries
Replace the batteries as soon as possible.
DIY Safe
Recommended partsAffiliate linksView 2 optionsHide

Check which battery type your CO alarm takes (look at the batteries fitted now), then choose the matching pack:

The handbook doesn't say which battery this alarm uses. Most caravan CO alarms take AA or 9V batteries, so check yours before ordering.

AA batteriesDuracell Plus AA Alkaline Batteries (12 Pack) 1.5V, LR06~£9.00 for 124.7★ (71,000+ ratings), dispatched/sold by Amazon
View on Amazon →
9V batteryDuracell Plus 9V Alkaline Batteries (2 Pack) 6LR61~£6.50 for 24.7★ (15,000+ ratings), dispatched/sold by Amazon
View on Amazon →
N/A
The CO alarm gives two chirps every half-minute alongside a double flash of its red LED
The alarm has reached the end of its life
Replace the alarm.
DIY Safe
N/A
CO alarm chirps every 30 seconds with the red LED flashing every 30 seconds
A fault with the alarm
Replace the alarm.
DIY Safe
N/A
CO alarm's red LED is on with a constant tone
A malfunction with the alarm
Replace the alarm.
DIY Safe
N/A
CO alarm sounds a loud, continuous tone with the red LED lit
Dangerous levels of carbon monoxide have been detected
Follow the emergency procedures described in the handbook (evacuate, ventilate, and don't return until the alarm clears).
DIY Safe