Dometic DC-Kit4
Official technical documentation and workshop diagnostics for Dometic DC-Kit4.
Technical Specifications
ElectricalInput Voltage: 12 V DC (driving mode), 230 V AC (mains). Inverter Output Voltage: 230 V AC. Inverter model: SinePower MSI2312T. Cable set cross-section: 70 mm², length: 1.0 m.
Gas Or PressureNot applicable (Electrical appliance accessory kit)
Capacities DimensionsCharging current distributor: ECL-102. Remote control: MCR9.
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Possible Cause | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|---|
N/A | The inverter cuts out due to low supply-battery voltage. | Supply battery voltage dropped below the low-voltage cutoff threshold (10.5 V). | Recharge the supply battery or start the engine to allow the charging current distributor to replenish battery voltage. | DIY Safe |
N/A | Roof air conditioner shuts off while inverter remains active. | On B2600 and FJ models, the supply battery's voltage is low, so the charging voltage regulator has disconnected it. | Wait for supply battery voltage to reach the switch-on point of the charging current distributor, or manually restart the air conditioner. | DIY Safe |
