Question 1

The awning tent only inflates with difficulty

Accepted Answer

Possible cause: Valve not fully screwed into air pole or inflation tube twisted at the valve. Check that valve is fully screwed in. Untwist inflation tube. Check hand pump function.

Question 2

Part of the awning tent won't inflate or deflate

Accepted Answer

Possible cause: Isolation valves connecting air poles are closed. Check that all isolation valves connecting the air poles are open.

Question 3

Air poles are kinked

Accepted Answer

Possible cause: Under-inflation. Add more air up to 9 PSI / 0.62 bar.

Question 4

Air leak

Accepted Answer

Possible cause: Loose valve, missing ring seal, loose valve cap, or puncture. Check valve is fully screwed in with ring seal in place. Ensure cap is tight. Locate puncture and repair using repair tape and solution.

Question 5

Water leak

Accepted Answer

Possible cause: Leaky seams, damaged tapings, or internal condensation. Check for leaky seams or moist areas; apply seam sealant. If no leaks found, increase ventilation to combat condensation.

Question 6

Rip in the fabric

Accepted Answer

Possible cause: Physical damage or wear. Seal the fabric with repair tape, or have an authorised specialist carry out repairs.

Dometic Club AIR Pro

Technical Specifications

Master Troubleshooting & Diagnostics Matrix

Error Code / Indicator	Symptom / Meaning	Possible Cause	Step-by-Step DIY Fix	Suggested Actions
`N/A`	The awning tent only inflates with difficulty	Valve not fully screwed into air pole or inflation tube twisted at the valve	Check that valve is fully screwed in. Untwist inflation tube. Check hand pump function.	DIY Safe
`N/A`	Part of the awning tent won't inflate or deflate	Isolation valves connecting air poles are closed	Check that all isolation valves connecting the air poles are open.	DIY Safe
`N/A`	Air poles are kinked	Under-inflation	Add more air up to 9 PSI / 0.62 bar.	DIY Safe
`N/A`	Air leak	Loose valve, missing ring seal, loose valve cap, or puncture	Check valve is fully screwed in with ring seal in place. Ensure cap is tight. Locate puncture and repair using repair tape and solution.	DIY Safe
`N/A`	Water leak	Leaky seams, damaged tapings, or internal condensation	Check for leaky seams or moist areas; apply seam sealant. If no leaks found, increase ventilation to combat condensation.	DIY Safe
`N/A`	Rip in the fabric	Physical damage or wear	Seal the fabric with repair tape, or have an authorised specialist carry out repairs.	DIY Check / Tech Fallback