Dometic CAM360AHDHD
Official technical documentation and workshop diagnostics for CAM360AHDHD.
View official manual on manufacturer's site ↗Technical Specifications
ElectricalOperating voltage range: 9 V - 24 V DC (Battery voltage drop threshold setting: 9 V - 24 V)
Gas Or PressureNot applicable
Capacities DimensionsFour 190° wide-angle cameras; Video compression bitrates: 4Mbps (low), 2Mbps (normal), 1Mbps (high); Recording duration: 3 to 30 min (configurable)
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Possible Cause | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|---|
N/A | Left view points extraction failed during calibration | Poor camera visibility of calibration mats, strong shadows, or light reflection on mats | Ensure uniform daylight illumination, avoid shadows and light reflections on calibration mats, and verify each camera can fully see 2 calibration mats and a portion of the vehicle body. | DIY Safe |
N/A | Right view points extraction failed during calibration | Poor camera visibility of calibration mats, strong shadows, or light reflection on mats | Ensure uniform daylight illumination, avoid shadows and light reflections on calibration mats, and verify each camera can fully see 2 calibration mats and a portion of the vehicle body. | DIY Safe |
N/A | Back view points extraction failed during calibration | Poor camera visibility of calibration mats, strong shadows, or light reflection on mats | Ensure uniform daylight illumination, avoid shadows and light reflections on calibration mats, and verify each camera can fully see 2 calibration mats and a portion of the vehicle body. | DIY Safe |
N/A | Points selection failed / Automatic calibration failed completely | Improper placement of calibration mats or distortion | Move the calibration mats at the vehicle's four corners, making sure none are badly warped or reflecting light, then re-run the automatic calibration. | DIY Safe |