Dometic AP Remote Control
Official technical documentation and workshop diagnostics for Dometic AP Remote Control.
Technical Specifications
ElectricalSupply voltage: 2 V … 3.5 V (2 AAA batteries, 1.5 V). Radio frequency: 433 MHz. Transmitting power: 10 mW.
Gas Or PressureNot applicable
Capacities DimensionsWeight (including batteries): 80 g. Storage temperature: –25 °C … 75 °C. Operating temperature: –20 °C … 65 °C. Humidity: ≤ 90%.
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Possible Cause | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|---|
N/A | Blind does not respond to the AP remote control (No power) | Battery drained or power supply issue to the blind | Check battery and check power to the blind. | DIY Safe |
N/A | Blind does not respond to the AP remote control (Wrong channel) | Incorrect channel number selected | Check channel number. | DIY Safe |
N/A | Blind does not respond to the AP remote control (Thermal cut-out) | Repeated or prolonged use caused thermal cut-out to activate | Wait 20 minutes for the motor's thermal cutout to reset. | DIY Safe |
N/A | Blind does not respond to the AP remote control (Pairing issue) | Wrong or lost pairing | Re-pair the AP remote control with the blind. | DIY Safe |
N/A | The blind moves the wrong way | Wrong setting | Change direction of blind. | DIY Safe |
N/A | More than one blind moves | Multiple blinds paired to each channel or set to channel P | Switch channels to control other blinds, or un-pair motors you don't want from the AP remote. | DIY Safe |
N/A | The display doesn't show a channel number | No power | Check battery. | DIY Safe |
N/A | The AP remote isn't behaving as expected | Programming timeout | Note the system drops out of programming mode automatically if no button is pressed for 30 seconds - don't leave long gaps between programming steps. | DIY Safe |