CBE PC180-ST
Official technical documentation and workshop diagnostics for PC180-ST.
Reference
- 1 Mains' general button ON/OFF; LED flashing indicates that the battery is low and that the low voltage device will turn on. NOTE: at start-up, the panel verifies the functioning of all LEDs, with the exclusion of ref. 14 and 15.
- 2 12V button; it controls the lights, 12V sockets and heating.
- 3 Water pump button; it controls the pump relais.
- 4 Awning light button; the awning light switches automatically off when you start up the engine.
- 5 Button to check the leisure battery (B2).
- 6 Button to check the car battery (B1).
- 7 Button to check the fresh water tank.
- 8 Button with integrated twilight sensor to set the intensity of the LED backlighting in a "night" situation (see also the "TWILIGHT" function).
- 9 If this symbol blinks the car battery (B1) has run down.
- 10 If this symbol blinks the leisure battery (B2) has run down.
- 11 If this symbol blinks the fresh water tank is empty.
- 12 If this symbol blinks the waste water tank is full.
- 13 LED display: voltmeter for the control of car and leisure battery voltage (scale 0 to 100%); fresh water tank level (Emergency level, 1/3, 2/3, 3/3).
- 14 It shows the leisure battery recharging through engine alternator.
- 15 LED to signal 230V net on.
Master Troubleshooting & Diagnostics Matrix
| Error Code / Indicator | Symptom / Meaning | Possible Cause | Step-by-Step DIY Fix | Suggested Actions |
|---|---|---|---|---|
Symbol ref. 9 blinking | Car battery (B1) alarm | Car battery voltage is lower than 12V | Once the car battery drops below 12V, the car battery alarm triggers automatically and symbol 9 starts blinking. | DIY Safe |
Symbol ref. 10 blinking | Leisure battery alarm (B2) | The leisure battery's voltage has dropped below 11V | Once the leisure battery drops below 11V, the leisure battery alarm triggers automatically and symbol 10 starts blinking. | DIY Safe |
LED flashing | Battery low / low voltage device intervention | The leisure battery has hit its minimum voltage threshold of 10V | An electronic protection device cuts all the 12V circuits once the leisure battery hits this 10V floor. Pressing the ON/OFF button restores everything for one more minute. | DIY Safe |
Symbol ref. 11 blinking | Fresh water tank empty alarm | Fresh water tank is empty | If this symbol blinks the fresh water tank is empty. | DIY Safe |
Symbol ref. 12 blinking | Waste water tank full alarm | Waste water tank is full | This symbol blinking means the waste water tank needs emptying because it's full. | DIY Safe |