Bailey • Unicorn • TV & Antenna
Unicorn models: Seville, Madrid, Valencia, Cabrera, Cadiz, Barcelona, Pamplona

Bailey Digital TV Antenna System

(2011 Model Year, Unicorn)

Sourced from Bailey's 2011 model year owner's manual for the Unicorn range (published under Bailey's "Service Handbook" label, but this edition's own content is a full owner's manual - no separate "Manual" document exists for this edition). If your caravan is a different age or range, some details - such as the exact control panel brand or chassis-component generation actually fitted - may not match. Always cross-check against the handbook that came with your specific caravan.

View official manual on manufacturer's site ↗

Also Fitted To This Caravan

Master Troubleshooting & Diagnostics Matrix

Error Code / IndicatorSymptom / MeaningPossible CauseStep-by-Step DIY FixSuggested Actions
N/A
Picture quality is poor, or interference is present
Coaxial plugs not wired or fitted correctly
Go through every coaxial plug and confirm it's correctly wired, using only decent-quality plugs
DIY Safe
N/A
Picture quality deteriorates, especially in poor reception areas
Coaxial cable routing is damaged, kinked, or running near electrical equipment
Trace the cable's path, steering clear of tight bends, kinks and hot surfaces, and take out (rather than coil) any slack length
DIY Safe
N/A
The Power Pack's red LED stays dark
Fault in the coaxial plug or cable between the Antenna Dome and the 'ANT-IN' socket
Take the Antenna Dome's cable out of the 'ANT-IN' socket - the LED lighting up at that point means the fault is in that coaxial plug or cable
DIY Safe
N/A
Picture quality is poor and the cause isn't yet isolated
The problem could sit in the antenna itself, or somewhere in the wiring linking the Power Pack to the TV outlet
Run a short hook-up test - wire the TV straight to the Power Pack using a TV fly lead, with the antenna dome plugged directly into 'ANT-IN'. A better picture here points to a wiring fault somewhere along the run from the Power Pack to the TV outlet
DIY Safe